若枫后处理论坛

 找回密码
 注册

QQ登录

只需一步,快速开始

快捷登录

楼主: lannbo

[原创] 如何用低版本的UG后处理构造器打开UG高版本的后处理PUI

    [复制链接]
发表于 2015-12-7 13:43:24 | 显示全部楼层
高版本里有有属性低版本里没有,因此倘若低版本能打开,这些属性不知如何识别
发表于 2015-12-12 22:39:50 | 显示全部楼层
没试过  有空试试看
发表于 2015-12-16 13:15:04 | 显示全部楼层
UP~~~~~~~~~~~~~~~~~~~~~~~
发表于 2016-2-19 02:28:14 | 显示全部楼层
继续关注一下这方面的信息
发表于 2016-3-4 21:35:34 | 显示全部楼层
好好好好好好好好
发表于 2016-3-20 19:36:27 | 显示全部楼层
今天最想说的话
发表于 2016-3-27 21:05:46 | 显示全部楼层
顶起。我是新手进来学习的
发表于 2016-4-2 05:49:01 | 显示全部楼层
别这么干,会有问题的
发表于 2016-5-3 06:47:30 | 显示全部楼层
学习了
发表于 2016-5-23 14:50:05 | 显示全部楼层
NX Post depends heavily on procedures in the ugpost_base.tcl file. This file is located in the mach/postprocessor directory. The system uses it to support the file I/O and other basic functions. This is updated with each NX release, and should not be modified. It is possible to overwrite procedures in this file through tcl programming, but this is not recommended. You can overwrite these procedures with a user created tcl file or by using the uplevel feature of tcl. When any of the procedures in ugpost_base.tcl are overwritten by the procedures in the postprocessor we no longer guarantee that the post will continue to work correctly from one release to the next. Some of the critical files that may cause problems when modified are
您需要登录后才可以回帖 登录 | 注册

本版积分规则

关闭

站长推荐上一条 /8 下一条

QQ|Archiver|小黑屋|若枫后处理论坛 ( 苏ICP备11015087号-1 )苏公网安备32059002001368号

GMT+8, 2020-9-29 03:30

Powered by Discuz! X3.4

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表